Aurora IPX-TC1-F

4K Streaming Transceiver with IPBaseT, SFP+ 10G Fiber, 1G LAN, 2 HDMI IN, 1 HDMI Out, RS-232, IR, Audio.

Product Downloads

User Guide	Spec Sheet	Manager User Guide
IPBaseT IPX Story	IPBaseT FAQ	Network Switch Config

The IPX-TC1 provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT™ technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K2K transceiver with zero compression and latency based on BlueRiver NT™ platform. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The IPX-TC1 can be set up as either one to make installation, inventory, and troubleshooting easier.
Another industry first is the option slot to add other IP capabilities, like ExtremeUSB® (USB 2.0 over IP) or Dante® audio, for a more complete, distributed system.

Audio, video, data, and control can be sent securely to one or many units using off-the-shelf 10G Ethernet switches. When the IPX-TC1 is set up to be a transmitter, the 2 HDMI inputs become a source switch and the HDMI output becomes a potential loop out. When set up as a receiver, a user can select the local HDMI inputs or an IP source. Seamless switching of the sources further enhances the presentation. Regardless of how the IPX-TC1 is set up, the audio can be de-embedded at any location, break away, and/or be sent to or received from a Dante® enabled device. The USB 2.0 option is also flexible, working as a KVM and/or a high-speed data transfer (480Mbps) for memory sticks. Each IPX-TC1 USB feature can also be set as a host or a device. To keep the system friendly, a customizable OSD and web server are available to be programmed as required. For RJ-45 LAN devices, the 1G Ethernet port allows full bandwidth end-to-end over the IPX-TC1 10G fiber or copper port. Control of the IPX system.

IPX control is available via our IPX Manager Windows® software, or the QXP-2-IPX.

Choice is important. That’s why the IPX-TC1 has an SFP+ port that can use single or multi-mode fiber – making the IPX-TC1 the ultimate AV IP product on the market today.

Note: The selected network switch needs to support: 10Gbps, Non-blocking IGMP.

Power Supply NOT included, please order separately.

Features:

Configure as Transmitter (Encoder) or Receiver (Decoder)
4K2K Over 10G Fiber
Zero Compression & Zero Latency
128x128 Capable with HDCP, Larger for Non-Encrypted Sources
Videowall Capability with Zero Latency
Seamless & Break-away Switching
SFP+ for Multi/Single Mode Fiber
10/100/1000Mbps LAN
2 HDMI Inputs, 1 HDMI Output
Line In/Out Stereo
RS-232 Serial Port & IR (Bidirectional)
User Configurable OSD
Integrated Web Server for Custom Control Pages
ExtremeUSB® - USB 2.0 480Mbps Option (Host or Device Configurable)
Dante® IP Audio Option
Front Keypad & IR Remote
Auto Sense Switching
Rack & Under Table Mounting

Specifications:

Video

Compression - Zero
Latency - Zero
HDMI Inputs - 2
HDMI Outputs - 1
Audio Analog - 3 Stereo Line In/Out (3.5mm TRS)
10G Ethernet - SFP+ (Single Mode or Multi-Mode) Fiber (IPX-TC1-F) or 10G copper (IPX-TC1-C)
LAN - RJ-45 10/100/1000M
Video bandwidth - 340MHz
Video support - Up to 4K2K 4:2:0 @60Hz
Audio support - Up to 32 channels & Break-away Capable
RS-232 - Up to 115k Baud (3.5mm TRS)
IR - 20KHz-60KHz Front Panel
USB Connector - USB 2.0 Type A (Host or Device Software Selectable) with Option Card
Expansion Port - SO-DIMM for ExtermeUSB® or Dante® Options
Interface - IR or Keypad via OSD, Webserver

Connectors

Digital Video - (2) HDMI in with 3.5mm TRS audio, (1) HDMI Out with 3.5mm TRS audio
Data - (1) Ethernet port for network, (1) USB ports for charging & ExtremeUSB Option

Control